Atomax Fuel System Cleaner — Diesel Additive

  • Cleaner Injectors
  • Better Mileage
  • Smoother Drive
Rs. 599.00Rs. 699.00

Inclusive of all taxes

Ships across India
Secure checkout
Made in India

Product Description

Atomax Fuel System Cleaner is a concentrated additive built for the fuel that actually comes out of Indian pumps. Pour it into the tank before you refuel and it travels with the fuel through the lines, pump and injectors as you drive, lifting the deposits that quietly cost you mileage and smooth running.

Every tank leaves a little behind. Heat bakes fuel residue onto injector tips, and ethanol-blended petrol loosens old varnish from the tank and carries it downstream. A fouled injector sprays a stream instead of a fine mist, so fuel burns unevenly. That is where rough idling, hesitation and a slow drift down in mileage usually come from.

Atomax works on that in four ways. Detergents bond to carbon and varnish deposits and break them down so they burn away harmlessly. Corrosion inhibitors lay a protective film across tank, pump and injector surfaces, which matters more now that ethanol pulls moisture into the fuel system. Lubricity agents replace what modern low-sulphur and ethanol-blended fuels dilute out, reducing wear on the pump and injectors. And cleaner atomisation supports a more complete burn, which means fewer unburnt hydrocarbons out of the exhaust.

It is preventive care rather than a repair. It will not fix a worn pump, a vacuum leak or tired spark plugs, and no additive can replace the energy ethanol removes from the fuel itself. What it can address is the separate loss caused by deposits, which for most vehicles is the recoverable part. Used regularly, it keeps the fuel system from getting dirty again in the first place.

Blended and quality-checked in India. Match the bottle to your fuel: the Petrol Additive for petrol engines including E20 and E30 blends, the Diesel Additive for diesel engines.

How to Use Atomax
  1. 1

    Measure the dose

    Use 2 to 3 ml per litre of fuel for regular upkeep, or 5 to 6 ml per litre when you are clearing heavy deposits.

  2. 2

    Pour into the tank

    Add it to the fuel tank before you refuel so it mixes evenly through the tank.

  3. 3

    Refuel as normal

    Fill up with the fuel your additive is made for: petrol or diesel.

  4. 4

    Just drive

    The formula circulates through the fuel lines, pump and injectors as you drive.

Always follow the dosage printed on the bottle and your vehicle manufacturer's fuel guidance.

Product Details
Brand
Atomax
Country of Origin
India
Compatible With
Cars, SUVs, bikes and scooters
Fuel Compatibility
Match the bottle to your fuel: petrol (including E20 and E30 blends) or diesel
Sizes
100ml treats up to 40 litres; 250ml treats up to 100 litres
Delivery
Ships across India, typically 3 to 7 business days

Got Questions?

Frequently Asked Questions

Dosage, compatibility and what to expect.

How much should I use?

Use 2 to 3 ml per litre of fuel for regular upkeep. If you are clearing heavy deposits, use 5 to 6 ml per litre. Do not exceed the dosage printed on the bottle.

How often should I use it?

Every 2,000 to 3,000 km for bikes and scooters, and every 3,000 to 5,000 km for cars. Regular use matters more than large doses.

Can I use the petrol additive in a diesel engine?

No. Always match the product to your fuel: the Petrol Additive for petrol engines, the Diesel Additive for diesel engines.

Is it safe for my engine?

Yes, when used as directed. Atomax is ash-free and burns completely, leaving nothing behind to foul sensors or the catalytic converter.

When will I notice a difference?

Allow a tank or two of normal driving. Detergent chemistry needs heat cycles and flow to work, and results depend on how much deposit was there to begin with.

Where do you ship and how long does it take?

We ship across India. Orders are dispatched within 48 hours and delivery typically takes 3 to 7 business days.